Welcome
Gel Testing
.17HMR
.22LR
.22 Magnum
.25ACP
7.62x25mm
.32ACP
32H&R Mag
.32NAA
.380ACP
.38 Special
.357 Magnum
.357SIG
9x18mm Mak
9x19mm
10mm Auto
.400 Cor-Bon
.40 S&W
.41 Magnum
.44 Special
.44 Magnum
.45ACP
22-250REM
.223REM
5.45x39mm
5.7x28mm
.257 WTHBY
6.5 Grendel
6.8mm SPC
30 Carbine
7.62x39mm
30-30WIN
.303 British
.308WIN
7.62x54mm
.351WIN
45-70GOV
.50BMG
.410 bore
20 gauge
12 gauge
Airguns
Blackpowder
Barriers
FAQ
Rant
Links
Download
e-mail me


 

Firearm: .38 Special with 1 7/8" barrel

Cartridge: 148gr Federal Gold Medal Match, full wadcutter profile

Block calibration : 8.9cm at 586 ft/sec

Single shot fired at block, bullet penetrated to 16.0" and was found 'sandwiched' between the rear face of the gelatin block and the front face of the polyester bullet arresting box. Bullet recovered at 0.386" average diameter.

The recoil from this round was very slight, penetration depth was more than adequate, and slight expansion occured. I like it as a choice for recoil-sensitive shooters, using .38 Special snubnose revolvers.

Talk with other shooters about this test on The High Road.org :
www.thehighroad.org


 
|Welcome| |Gel Testing| |.17HMR| |.22LR| |.22 Magnum| |.25ACP| |7.62x25mm| |.32ACP| |32H&R Mag| |.32NAA| |.380ACP| |.38 Special| |.357 Magnum| |.357SIG| |9x18mm Mak| |9x19mm| |10mm Auto| |.400 Cor-Bon| |.40 S&W| |.41 Magnum| |.44 Special| |.44 Magnum| |.45ACP| |22-250REM| |.223REM| |5.45x39mm| |5.7x28mm| |.257 WTHBY| |6.5 Grendel| |6.8mm SPC| |30 Carbine| |7.62x39mm| |30-30WIN| |.303 British| |.308WIN| |7.62x54mm| |.351WIN| |45-70GOV| |.50BMG| |.410 bore| |20 gauge| |12 gauge| |Airguns| |Blackpowder| |Barriers| |FAQ| |Rant| |Links| |Download|

Webhosting